⎝⎛新宝1娱乐⎞⎠

> 丝扣橡胶软接头,由壬橡胶接头 Your current location : ⎝⎛新宝1娱乐⎞⎠ > Rubber joint series > Thread rubber soft joint
Hot NewsMore >>
Hot Products More >>
Soft rubber connector with thread
Soft rubber connector with thread
Soft rubber joint
Soft rubber joint
Double sphere rubber soft joint
Double sphere rubber soft joint
Limit anti-pulling rubber soft joint
Limit anti-pulling rubber soft joint
Soft rubber connector with thread

      Soft rubber connector with thread

      The threaded rubber joint ball is composed of a rubber tube with an inner rubber layer, a reinforced layer with multiple scraped nylon cord fabrics, and an outer rubber layer. It solves the problem of easy leakage caused by traditional rubber nozzles due to poor interchangeability and poor sealing, and it is safer and more reliable to use. At the same time, connection elements of different materials can be selected according to different conditions of use, and the scope of application is wider. Suitable for water, oil, air, etc., it is the best product for pipeline inlet and outlet connection.

      Performance characteristics

      Applicable media for threaded rubber joint products

      Installation of threaded rubber joints

      Technical standards for threaded rubber joints

      Specifications of threaded rubber joints

      "I met you by no means", thank you very much for being able to click into the official website of "Hengzhong" in the vast information on the Internet. If you can provide you with technical services in terms of [silk rubber joints, rubber joints] It will be an honor for everyone! Next you will see the Hengzhong soft rubber joints for silk buckles. The technical information of soft rubber joints for silk buckles prepared by Renren Rubber Joint Technology. The technical information of Renun Rubber Joints is hoped to be helpful to your choice!

      Product aliases: non- wire buckle rubber joints , soft rubber connections, shock absorbers, non-wire buckle soft connections, rubber flexible joints, rubber pipe joints, etc.
      Connector specifications : [DN15mm-DN80mm]
      Connector color : black, see the product display picture for the actual color.
      Scope of application : [acid, alkali, corrosion, oil, hot water, cold water, compressed air, compressed natural gas, etc.]
      Quality certification: ISO9001-2008
      天然橡胶、三元乙丙橡胶、丁晴橡胶、氟橡胶等 Joint material: natural rubber, EPDM rubber, nitrile rubber, fluorine rubber, etc.
      Damping level: A, excellent shock absorption
      Working temperature: -40 degrees to 80 degrees (also can process high temperature resistant rubber joints)

      • Stable quality: implement quality monitoring throughout the process, meticulous and comprehensive detection!

      • Reasonable price: efficient internal cost control, reducing expenses and benefiting customers!

      • Fast delivery: advanced production lines, sufficient stocking, shortened delivery time!

      Performance characteristics

      The ball made of non-woven rubber joint is composed of a rubber tube with an inner rubber layer, a reinforced layer with multiple scraped nylon cord fabrics, and an outer rubber layer. The rubber materials used are different according to different media, such as natural rubber, styrene-butadiene rubber, butyl rubber, nitrile rubber, EPDM rubber, neoprene rubber, silicone rubber, fluorine rubber and so on. With heat resistance, acid and alkali resistance, corrosion resistance, wear resistance, oil resistance and other functions. This product has the characteristics of high pressure resistance, good elasticity, large deflection displacement, aging resistance, easy installation, strong selectivity, and good shock absorption.

      1. High internal density, can withstand high pressure, good elastic deformation effect.

      2, reduce vibration, reduce noise, good scalability, easy to use.

      3. It is a pipe joint with high elasticity, high air tightness, medium resistance and weather resistance. Silk-button rubber soft joints take advantage of rubber's elasticity, high air-tightness, medium resistance, weather resistance and radiation resistance. After the polyester cord fabric with high strength, strong heat and heat stability is diagonally compounded, After high pressure and high temperature mold vulcanization.

      Product applicable media:

      Sea water, fresh water, hot and cold water, drinking water, domestic sewage, crude oil, fuel oil, lubricating oil, refined oil, air, gas, steam and granular powder.

      Product application range:

      Due to the good overall performance of Hengzhong Silk-Lock Rubber Joints , it is mainly used for the lifting and transportation of raw water and sewage, feed water and cooling circulating water for thermal power plants, metallurgical industry, condensate water, pipeline transportation of chemicals in chemical industry, petrochemical Cooling, dilution and flexible connections between long and short distance pipelines in other industries. Because rubber has high abrasion resistance, it is also suitable for conveying granular and powdery materials and vapors in all industries.

      Use installation

      Excellent, threaded (optional) rubber soft joints must be selected according to the working pressure of the pipeline, connection method, medium and compensation amount, and the number is selected according to noise reduction displacement requirements.

      Second, when the installation pipeline produces transient pressure and is greater than the working pressure, a joint higher than the working pressure should be selected. (For example, when the instantaneous pressure at the start of the pipeline is greater than 1.0MPa, a joint working at 1.6MPa should be used. When the instantaneous pressure is greater than 1.6MPa, a 2.5MPa joint should be used.)

      Third, when the soft joints made of rubber thread buckle are used at the inlet and outlet of the pump, they should be located near the pump side, and metal reducing joints should be installed between the pump and the large diameter reducer.

      Fourthly, when the pipe medium of the non-threaded rubber soft joint is acid-base, oil, high temperature and other special materials, a joint that is one gear higher than the working pressure of the pipe should be selected.

      Fifth, the flange of the soft joint made of rubber thread should be a valve flange or a flange conforming to GB / T9115.1 (RF).

      Sixth, the normal applicable medium is ordinary water at a temperature of 0-60 ° C. Special media such as oil, acid and alkali, high temperature and other corrosive and hard textures should use the corresponding special resistant soft rubber connection. Do not use it blindly or universally.

      Seventh, when the displacement of the pipeline is ≥ the maximum compensation amount of the soft rubber connection, the number of joints should be increased to parallel the displacement. It is strictly forbidden to adjust the excess of the pipeline to make the joint in the extreme disturbance displacement and deviation state, and not to exceed Limits (telescopic, displacement, deflection, etc.).

      Eighth, the high-level water supply or suspended water supply uses a soft rubber connection. The pipeline should be fixed on a hanger, bracket or anchor, and the joint cannot bear the weight and axial force of the pipeline. Otherwise, the joint should be equipped with anti-pulling device (its The bearing force must be greater than the axial force of the pipeline).

      When the medium passed by Hengzhong Pipe is made of non-threaded rubber soft joint, the medium passing through is acid-base, oil, high temperature and other special materials. The joint should be selected by a gear higher than the working pressure of the pipe, and it also has the characteristics of noise reduction displacement. .

      technical standard

      Item Item Model KFT-1 KFT-2 A, such as medium oil, acid and alkali substances
      B. Special requirements for working temperature
      C. You can also write to us to customize
      D. Please specify when ordering
      A. If media is oil, acid or alkali.
      B. If special requirements for working temperature
      C. If OEM orders with drawings or samples
      D. Please Inform us about above when ordering
      MpaWoring pressure 1.0 (10) 1.6 (16)
      Burst Pressure 2.0 (20) 3.0 (30)
      Kpa Vacuum 53.3 (400) 86.7 (650)
      Applicable Temperature -20 ℃ ~ + 115 ℃ (special can reach -30 ℃ ~ + 250 ℃) -20 ℃ ~ + 115 ℃ (-30 ℃ ~ + 250 ℃ under special conditions)
      Applicable Medium Air, compressed air, water, sea water, oil, acid, alkali, etc.
      Note: the materials of main parts are the same with those of KXT type

      Specifications

      No. Part Material
      1 Body Natural rubber (NR), neoprene (CR), butyl rubber (IIR), nitrile rubber (NBR), fluoro rubber (FKM), EPDM
      2 Inner & Outer Rubber Natural rubber (NR) Neoprene (CR) Butyl rubber (IIR) Nitrile rubber (NBR) Fluorine rubber (FKM) Ethylene propylene rubber (EPDM) Polytetrafluoroethylene (PTFE)
      3 Body Carcass Nylon cord fabric
      4 Reinforcing Ring Multi-strand coppering steel wire
      5 Threaded union rubber joint Cast and forged carbon steel (Q235), Stainless steel (201, 304, 316, 321), Plastic (CPVC, PVDF, PPH, UPVC, RPP)

      Main data

      Nominal diameter DN
      Nominal Diameter
      (Mm)
      length
      LengthLmm
      Axial displacement
      Axial displacement mm
      Lateral displacement
      Haorizontal isplacement mm
      Deflection angle
      Angular deflection (a1 + a2) °
      mm

      Inch

      A type Type B Extension Compression
      15 0.5 180 200 5 10 20 45
      20 0.75 200 200 5 10 20 45
      25 1 200 200 5 10 20 45
      32 1.25 210 200 5 10 20 45
      40 1.5 220 200 5 10 20 45
      50 2 220 200 5 10 20 45
      65 2.5 245 265 5 10 20 45
      80 3 285 285 5 10 20 45
      Note: 1. Special requirements can be made according to user's drawings. Thread joints are produced using (ISO, ASME, BS, JIS, etc.) thread standards. Rubber spheres can be made of natural rubber, EPDM, neoprene, butyl rubber, nitrile rubber, fluorine rubber, etc.
      Notes: 1. For OEM orders with special requirement, threaded unions should be made according to customers' drawings. Thread standard can be ISO, ASME, BS, JIS, etc. Material of rubber body can be NR natural rubber, EPDM, Neoprene, IIR butyl rubber, NBR Buna-N, FKM, etc.

      The Belt and Road Initiative demonstrates the style of great powers and builds up national brands! Achieving the brand is not the pursuit of Hengzhong people. How to make Hengzhong [silk rubber joints, rubber joints] stable and reliable quality, create greater customer value, and provide more assured products for the society, is what Hengzhong people are committed to direction! Co-create national brands, promote Made in China, and stand on the tide of the world, but my Chinese sons and daughters! Hengzhong is willing to work with you to build the Chinese dream, and wish you all the best!

      Gongyi Hengzhong Water Supply Material Co., Ltd.

      Address: South Section of Yong'an Road, Gongyi City, Henan Province

      Phone: 0371-64032688

      Fax: 0371-64032611

      Mobile: 13938406796 15838275686

      Website: http://cddk666.com

      Email: hengzhonggongshui@163.com

      QR code at the bottom

      Copyright: Gongyi Hengzhong Water Supply Material Co., Ltd.

      Share button

      七乐彩 真人游戏平台注册 天天电玩城 欢乐拼三张